Chauvet Q-Spot 200 User Manual download pdf (Page 18)

Master/Slave Mode (Master Sound, Master Auto):

This mode will allow you to link up to 32 units together without a controller.

1) Use standard DMX cables to daisy chain your units together via the DMX connector on the rear

of the units. For longer cable runs we suggest a terminator at the last fixture. For more

information about terminators, see page 10.

2) Choose a unit to function as Master mode. This unit must be the first unit in the line.

3) Press the <MENU> button.

4) Scroll up or down until <3-Operation> is displayed.

5) Press <ENTER>.

6) Press up or down until <select: Auto1>, <select: Auto2>, <select: Music1>, <select:

Music1>,or <select: Random> is displayed.

7) Press <ENTER>.

8) Chain the units together using DMX cable.

9) On the slave units, press the <MENU> button.

10) Scroll up or down until <3-Operation> is displayed.

11) Press up or down until <select: Slave> is displayed.

12) Press <ENTER>.

13) The units will react to the low frequencies of music via the internal microphone in Sound-Active

mode, or the unit will auto change in Auto Mode. In Random mode, the unit will periodically

change between auto and sound-active modes.

DMX Mode

This mode allows the unit to be controlled by any universal DMX controller. If you are unfamiliar with

DMX, please read the DMX Primer on page 23.

1) Press the <MENU> button.

2) Scroll up or down until <3-Operation> is displayed.

3) Press <ENTER>.

4) Press up or down until <select: DMX> is displayed.

5) Press <ENTER>.

Q-Spot 200 User Manual 18 9/5/2007 2:59 PM

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 26 27

No comments

Chauvet Q-Spot 200 User Manual Page 18