Chauvet Scorpion Scan 3D EU User Manual download pdf (Page 8)

Setup

Page 8 of 44

International laser safety regulations require that lasers must be operated in the

fashion with a minimum of 3 meters (9.8 ft) of vertical separation between the floor

and the lowest laser light vertically. Additionally, 2.5 meters of horizontal separation

is required between laser light and audience or other public spaces:

CAUTION! Use of control, adjustment, or performance of procedures other than what

is specified in this manual may result in hazardous radiation exposure.

Rigging

• Before deciding on a location for the product, always make sure there is easy access to the

product for maintenance and programming/ fluid replenishment purposes.

•

Make sure that the structure or surface onto which you are mounting the product can support the

product’s weight (see the Technical Specifications).

•

Any surface the product is being mounted to should be able to support 10 times the weight for an

hour without deforming.

•

When mounting the product overhead, always use a safety cable. Mount the product securely to

a rigging point, such as an elevated platform or a truss.

• When rigging the product onto a truss, you should use a mounting clamp of appropriate weight

capacity.

Mounting Diagram

Manual Bracket

Adjustment

Mounting Clamp

Safety Cable

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 43 44

No comments

Chauvet Scorpion Scan 3D EU User Manual Page 8