Chauvet SlimBANK User Manual download pdf (Page 16)

Page 16 of 19 SlimBANK™ TRI-18 User Manual

Master/Slave

Mode

The Master/Slave mode allows a single SlimBANK™ TRI-18 unit (the “master”) to

control the actions of one or more SlimBANK™ TRI-18 units (the “slaves”) without the

need of a DMX controller. The master unit will be set to operate in either an auto

program or Sound-Active mode, while the slave units will be set to operate in Slave

mode. Once set and connected, the slave units will operate in unison with the master

unit.

Configure the units as indicated below.

Slave units:

1. Set the DMX address to d001.

2. Connect the DMX input of the first slave unit to the DMX output of the master unit.

3. Connect the DMX input of the subsequent slave units to the DMX output of the

previous slave unit.

4. Finish setting and connecting all the slave units.

Master unit:

1. Set the master unit to operate in either an auto program or Sound-Active mode.

2. Make the master unit the first unit in the DMX daisy chain.

• Configure all the slave units before connecting the master unit to the DMX daisy

chain.

• Never connect a DMX controller to a DMX string configured for Master/Slave

operation because the controller may interfere with the signals from the master unit.

• Do not connect more than 31 slave units to the master unit.

1 2 ... 11 12 13 14 15 16 17 18 19

No comments

Chauvet SlimBANK User Manual Page 16