Chauvet Scorpion Sky User Manual download pdf (Page 16)

Page 16 of 26 Scorpion™ Scan RGB EU User Manual (Rev. 01c)

Standalone

Operating

Modes

Setting this product to operate in DMX mode will allow you to control it without a DMX

controller.

1) Connect this product to a suitable power outlet.

2) Turn this product on.

Never connect a fixture that is operating in any standalone mode, whether

Static, Automatic, or Sound to a DMX string connected to a DMX controller.

This is because fixtures in standalone mode may transmit DMX signals that

could interfere with the DMX signals from the controller.

Sound Mode

To enable the Sound mode, do the following:

1) Press <MENU> repeatedly until the active option of the Auto/Sound branch

( to ) appears on the display.

2) Use <UP> or <DOWN> to select a sound triggered program ( or ).

3) Press <ENTER> (the new sound program will show solid on the display).

4) Turn the music on.

5) Press <MENU> repeatedly until the active option of the Sound Sensitivity branch

( to ) shows blinking on the display.

6) Use <UP> or <DOWN> to select the sensitivity level ( ~ ).

7) Press <ENTER> (the new sound sensitivity will show solid on the display).

The fixture will only respond to the low frequencies of the music (bass and

drums).

Automatic

Mode

To enable the Automatic mode, follow the instructions below:

1) Press <MENU> repeatedly until the active option of the Auto/Sound branch

( to ) shows blinking on the display.

2) Use <UP> or <DOWN> to select an automatic program

( or ).

3) Press <ENTER> (the new auto program will show solid on the display).

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 25 26

No comments

Chauvet Scorpion Sky User Manual Page 16