Page 16 of 28 Freedom™ series User Manual (Rev. 6)
(Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
Never connect a product that is operating in any standalone mode
connected to a DMX controller. Product
s in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
Automatic Mode
To enable the Automatic Mode, do the following:
1. Press <MODE> repeatedly until SYS, ACt, SLAv, or S-1r shows on the display.
2. Use <UP> or <DOWN> to select ACt.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to choose your desired program (A000–A023).
5. Press <ENTER>.
Certain programs will have additional functionality. To find these options, press
<ENTER> after selecting an auto program. Then press <UP> or <DOWN>. Not every
program will feature all the added functionality.
Function Description
F000–F100 Flash speed (slow to fast)
SL.00–SL.32 Sound sensitivity (Automatic Mode)
P000–P100 Run speed (slow to fast)
C000–C100 Dimmer (brightness increasing)
Comments to this Manuals