Intimidator™ Wave IRC User Manual Rev. 1 Page 29 of 32
5. TECHNICAL INFORMATION
Maintenance
Dust build-up reduces light output performance and can cause overhea
lead to reduction of the light source’s life and mechanical wear.
performance and minimize wear, clean the product at least twice a month. However,
usage and environmental conditions contribute to increased cleaning frequency.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected
on the external surface/vents.
4. Clean all external optics and glass/transparent surfaces with a mild soap solution,
ammonia-free glass cleaner, or isopropyl alcohol.
5. Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
6. Softly wipe any dirt or grime to the outside edges of the external optics or
glass/transparent surface.
7. Gently polish the external optics and glass/transparent surfaces until they are
free of haze and lint.
Always dry the external optics and glass/transparent
cleaning them.
Do not spin the cooling fans using compressed air
them.
Comments to this Manuals