Chauvet Q-Wash 250 User Manual download pdf (Page 16)

Operation

-12- Q-Wash™ 419Z-LED User Manual

Edit Custom

Programs

This setting allows the programming of up to 49 steps in the CUSTOM running mode.

1. Go to STAND ALONE > EDIT.

2. Select STEP.

3. Set the program step (01~49).

a. Select PAN or TILT.

i. Set the position value (000~255).

ii. Repeat for the other position

b. Select DIMMER.

i. Set the intensity value (000~255).

c. Select RED, GREEN, BLUE, or WHITE.

i. Select the color value (000~255).

ii. Repeat for the other colors.

d. Select STROBE.

i. Set the frequency value (000~255).

e. Select ZOOM.

i. Set the angle value (000~255).

f. Select TIME.

i. Select the step duration (000~255).

g. Repeat for the other steps

4. Select USE.

a. Select

YES

to save the program or

to discard.

Master/Slave

The Master/Slave mode allows a group of Q-Wash™ 419Z-LEDs (slave products) to

simultaneously duplicate the output of another Q-Wash™ 419Z-LED (master product)

without a DMX controller.

1. Set each of the slave products:

a. Go to STAND ALONE > RUN.

b. Select SLAVE.

2. Set the master product:

a. Set the running mode to DMX (see DMX Control

b. Select an Auto, Custom, or Static program as explained in Auto/Custom

Programs or Static Control.

• The master product is the one that runs a program whether in Auto, Custom,

or Static

Color mode.

• Do not connect a DMX controller to the products configured for Master/Slave

operation. The DMX controller may interfere with signals from the master product.

• The master product should be the first product in the daisy chain.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 34 35

Comments to this Manuals

No comments

Chauvet Q-Wash 250 User Manual Page 16

Comments to this Manuals

Related products and manuals for Stroboscopes & disco lights Chauvet Q-Wash 250