Operation
-14- Q-Wash™ 419Z-LED User Manual
Color Settings
The Color setting determines how the product generates the white color based on
various RGB settings.
1. Go to the SETTINGS > PERFORM main level.
2. Select COLOR.
3. Select
,
, or
.
OFF:
When all the RGB faders are set to 255, the output is maximum, although
the resulting white color may not be balanced.
RGBtoW:
When all the RGB faders are set to 255, the resulting output is defined by
the configured White color (see White Calibration).
UC:
When all the RGB faders are set to 255, the output matches that of less
efficient products (Universal Color).
Dimmer Curves
This setting provides you with four options to simulate the dimming curve of an
incandescent light product.
1. Go to the SETTINGS > PERFORM main level.
2. Select DIMMER.
3. Select the desired dimmer curve (OFF, DIM1, DIM2, DIM3, or DIM4).
The output is proportional (linear) to the dimmer and RGBW channel
values.
The output follows the dimmer and RGBW channel values based on the
corresponding dimmer curve, being DIM1 the fastest and DIM4 the
Settings
This setting allows you to select the dimmer curve shape using the red, green, blue,
white, and dimmer faders.
1. Go to the SETTINGS > PERFORM main level.
2. Select CURV.
3. Select the desired dimmer curve (
,
,
, or
).
This output is proportional (linear) to the Dimmer and RGBW channel
values.
This output follows the dimmer and RGBW channel values based on the
corresponding dimmer curve, being CURV1 the fastest and CURV3 the
For optimum control of the 16-bit dimming channels in the PERSON2 and PERSON5
personalities, be sure that both dimming curves in SETTINGS > PERFORM > DIMMER
and SETTINGS > PERFORM > CURV are set to OFF
Comments to this Manuals