Chauvet Q-Wash 436Z-LED User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
Setup
Q-Wash™ 436Z-LED User Manual Rev. 2 -7-
Power Linking
The Q-Wash™ 436Z-LED supports power linking. You can power link up to 2 products at
120 VAC, 5 products at 208 VAC or 6 products at 230 VAC
This product comes with a power input cord. This product does not come with a power
linking cable; however, power linking cables are available as an option.
DMX Linking
You can link the Q-Wash™ 436Z-LED to a DMX controller using a standard DMX serial
connection. If using other DMX compatible products with the Q-Wash™ 436Z-LED
, you
can control each individually with a single DMX controller.
DMX Modes
The Q-Wash™ 436Z-LED uses the standard DMX data connection for the PERSON 1,
PERSON 2, PERSON 3, PERSON 4, and PERSON 5 DMX personalities.
Refer to the Introduction chapter for a brief description of these modes.
Refer to the Operation chapter to learn how to configure the Q-Wash™ 436Z-LED to
work in these modes.
The DMX Values section provides you with detailed information regarding the DMX
modes.
Master/Slave
Connectivity
The Master/Slave mode allows a Q-Wash™ 436Z-LED (the “master product”) to control
one or more Q-Wash™ 436Z-LED
s (the “slave products”) without a DMX controller. One
Q-Wash™ 436Z-LED
becomes the master product when running an Auto or Custom
program, or by being in Static Control mode.
You must configure each slave product’s control panel to operate in Slave
mode. During
Master/Slave operation, the slave products will operate in unison with the master
product.
DO NOT connect a DMX controller to products operating in Master/Slave mode.
The DMX controller signals may interfere with the signals from the master
product.
The Operation chapter of this manual provides detailed instructions on how to
configure the Master and Slave products.
If you are not familiar with or need more information about DMX standards,
Master/Slave connectivity, or the DMX cables needed to link this product to a DMX
controller, download the DMX Primer from the Chauvet
website:
www.chauvetpro.com.
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Comments to this Manuals

No comments