Chauvet Q-Wash 436Z-LED User Manual download pdf (Page 14)

Operation

-10- Q-Wash™ 436Z-LED User Manual Rev. 2

Loss of Signal Setting

This setting controls how the product will respond when the DMX signal is lost.

1. Go to SETTINGS > PERFORM > DMX ERROR.

a. Select SAVE to make the product use the last command used when the signal

is lost.

b. Select

BLACK

to turn off the all the LEDs when the signal is lost.

Product Reset

1. Select SETTINGS > PERFORM > DMXRESET.

a. Select DMX to reset the product from a DMX controller or DISPLAY to reset

the product from the control panel.

Static Control

The Static Color mode allows for permanent RGBW color mixing without a DMX

controller.

1. Go to the MANUAL > MANUAL.

2. Select DIMMER.

a. Set the intensity value (000~255).

3. Select RED, GREEN, BLUE, or WHITE.

a. Select the color value (000~255).

b. Repeat for the other colors.

4. Select PAN or TILT.

a. Set the position value (000~255).

b. Repeat for the other position.

5. Select STROBE.

a. Set the frequency (00~10).

6. Select ZOOM.

a. Set the angle (000~255).

7. Select CONTROL (Fan Speed Control Only).

a. No function (000~059).

b. Automatic fan speed control (060~079).

c. Slow fan speed (080~099).

d. Normal fan speed (100~119).

e. High fan speed (120~139).

f. No function(140~255).

Auto/Custom

Programs

Auto programs allow for dynamic RGBW color mixing and movement without a DMX

controller.

1. Go to STAND ALONE > RUN.

a. Select AUTO1, AUTO2, TEST, or CUSTOM.

You cannot edit any of the auto programs (AUTO1, AUTO2, or TEST). However,

you can edit the custom programs (CUSTOM).

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Comments to this Manuals

No comments

Chauvet Q-Wash 436Z-LED User Manual Page 14

Comments to this Manuals

Related products and manuals for Floodlights Chauvet Q-Wash 436Z-LED