Chauvet Q-Wash 436Z-LED User Manual download pdf (Page 13)

Operation

Q-Wash™ 436Z-LED User Manual Rev. 2 -9-

4. Operation

Control Panel

Description

Button Function

<MENU>

Exits from the current menu or function

<ENTER>

Enables the currently displayed menu or sets the currently

selected value in to the current function

<UP>

Navigates upward through the menu list and increases the

numeric value when in a function

<DOWN>

Navigates downward through the menu list and decreases the

numeric value when in a function

Control Options

You can set the Q-Wash™ 436Z-LED starting address in the 001~512 DMX range. This

enables control of up to 17 products in the 29-channel PERSON3 or

PERSON5

personalities.

Programming

Refer to the Menu Map to understand the menu options. The menu map shows the main

level and a variable number of programming levels for each option.

• To go to the desired main level, press <MENU> repeatedly until the option shows on

the display. Press <ENTER> to select. This will take you to the first programming

level for that option.

• To select an option or value within the current programming level, press <UP> or

<DOWN> until the option shows on the display. Press <ENTER> to select. In this

case, if there is another programming level, you will see that first option, or you will

see the selected value.

• Press <MENU> repeatedly to exit to the previous main level.

DMX Personality

This setting allows you to choose a particular DMX personality.

1. Go to the PERSON main level.

2. Select the desired personality (PERSON1, PERSON2, PERSON3, PERSON4, or

PERSON5

See the DMX Values section for the highest starting address you can select for

each personality.

Make sure that the starting addresses on the various products do not overlap due

to the new personality setting.

DMX Control

In this mode, each product will respond to a unique starting address from the DMX

controller. All products with the same starting address will respond in unison.

1. Select a DMX personality as shown in DMX Personality.

2. Set the running mode as follows.

a. Go to STAND ALONE > RUN.

b. Select the DMX 512 programming level.

3. Set the starting address as follows.

a. Go to ADDRESS main level.

b. Select the starting address (001~512).

The highest recommended starting address for each DMX mode are as follows:

DMX Mode

DMX

Address

DMX Mode

DMX

Address

DMX Mode

DMX

Address

PERSON 1

503

PERSON 2

497

PERSON 3

484

PERSON 4

505

PERSON 5

484

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Comments to this Manuals

No comments

Chauvet Q-Wash 436Z-LED User Manual Page 13

Comments to this Manuals

Related products and manuals for Floodlights Chauvet Q-Wash 436Z-LED