Chauvet LED Pinspot 360 User Manual download pdf (Page 8)

LED Pinspot 360 User Manual 8 Rev. 2

Do not use a tool on

the bracket

adjustment knob

Mounting

Brackets (2)

Mounting

Orientation

The LED Pinspot 360 may be mounted in any safe position, provided there is adequate room for

ventilation.

Rigging

Be sure that the structure can support the weight of the fixture. Please see the “Technical

Specifications” section of this manual for a detailed weight listing. Mount the fixture securely. This

may be done with a screw, nut and bolt, or a hanging clamp. When rigging consider routine

maintenance and DIP switch access.

• If the power link out is intended to be used with multiple fixture, take into account the length

of each power cable, and mount the fixtures close enough to one another to accommodate

for this.

• When aiming the fixtures, you may use the bracket adjustment knob. Loosen the knob,

adjust to the desired angle, and then tighten the knob by turning clockwise. Do not use

tools for this step, as it may cause damage.

• Two (2) mounting positions must be used for this fixture when hanging. This must be done

using both of the mounting brackets, which are shown below.

• Safety cables must always be used.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Chauvet LED Pinspot 360 User Manual Page 8