Page 16 of 21 Freedom™ Par Quad-4 User Manual Rev. 1
(Standalone)
Use standalone configuration to operate the product without a DMX controller. There are a variety of
Standalone modes and they are powerful tools for making exciting looks.
Never connect a product operating in a standalone mode (Static, Sound-Active, Auto, or Infrared)
to a DMX chain that includes a DMX controller. Products in a
standalone mode can transmit DMX
signals that interfere with the DMX signals from the controller.
Mode
Sound-Active mode sets the product to respond to sounds and music.
To enable the Sound-Active mode, do the following:
1. Press <MENU> repeatedly until Snd shows on the display.
2. Press <ENTER>.
To set the sound sensitivity, follow the instructions below:
1. Press <MENU> repeatedly until SenS shows on the display.
2. Use <UP> or <DOWN> to select the desired sound sensitivity (u 0–u100).
The product will respond only to low frequencies of music (bass and drums).
If the product is not responding to sound, increase the sensitivity.
Auto mode sets the product to 1 of 4 preset color programs.
To set the product to Auto mode, do the following:
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER> and P 1–P 4 shows on the display.
3. Use <UP> or <DOWN> to select the desired auto program:
• P 1 - 3-color snap
• P 2 - 3-color fade
• P 3 - 7-color snap
• P 4 - 7-color fade
4. Press <ENTER>.
To set the auto program speed, follow the instructions below:
1. Press <MENU> repeatedly until S-- shows on the display.
2. Use <UP> or <DOWN> to select the desired auto program speed (S 1–S100, slow to fast).
Dimmer Mode
To select a dimmer mode, do the following:
Press <MENU> repeatedly until dIM shows on the display. 1.
Press <ENTER> and one of the following shows on the display: 2.
• OFF (dimmer speed off)
• dIM1 (dimmer mode 1, fast speed)
• dIM2 (dimmer mode 2, middle speed)
• dIM3 (dimmer mode 3, slow speed)
Use <UP> or <DOWN> to select the desired dimmer mode. 3.
To select a preset static color, do the following:
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the desired preset color (C 1–C 15).
Mixing
To custom mix a color, follow the instructions below:
1. Press <MENU> repeatedly until U-- shows on the display.
2. Press <ENTER> and one of the following colors shows on the display: rXXX (red), gXXX
bXXX (blue), or AXXX (amber).
3. Press <ENTER> repeatedly to select the desired color.
4. Use <UP> or <DOWN> to select the desired color value (0–255).
NOTE: Selecting 0 will turn the color off.
5. Press <ENTER> to select color value and continue to the next color.
6. Repeat steps 3 to 5 until you create your desired color.
Comments to this Manuals