Chauvet SPOT LED 450 User Manual download pdf (Page 10)

Page 10 of 21 Intimidator™ Spot LED 450 User Manual Rev. 2

Configuration

(DMX)

Set the product in DMX mode to control with a DMX controller.

1. Connect the product to a suitable power outlet.

2. Turn the product on.

3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input

socket on the product.

Starting Address

When selecting a starting DMX address, always consider the number of DMX channels

the selected DMX mode uses. If you

choose a starting address that is too high, you could

restrict the access to some of the product’s channels.

The Intimidator™ Spot LED 450 uses up to 14 DMX channels in its ADVANCED

personality, which defines the highest configurable address to 499.

If unfamiliar with DMX, download the DMX Primer from www.chauvetlighting.com

To select the starting address, do the following:

1. Press <MENU> and menu items show on the display with a blinking < next to the

selected menu item.

2. If it is not already selected, use <UP> or <DOWN> to select DMX Address.

3. Press <ENTER> and 001–512 shows on the display.

4. Use <UP> or <DOWN> to select the starting address.

5. Press <ENTER>.

DMX

Personalities

The Intimidator™ Spot LED 450 has two DMX personalities. One is a basic 8-channel

personality and the other is a more advanced 14-channel personality.

To select either the basic or advanced personality, do the following:

1. Press <MENU> and menu items show on the display with a blinking < next to the

selected menu item.

2. Use <UP> or <DOWN> to select Channel.

3. Press <ENTER> and ADVANCED or Basic shows on the display.

4. Use <UP> or <DOWN> to select ADVANCED for the 14-channel mode or Basic for

the 8-channel mode.

5. Press <ENTER>.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 20 21

No comments

Chauvet SPOT LED 450 User Manual Page 10