Intimidator™ Spot LED 450 User Manual Rev. 2 Page 17 of 21
You are able to select the length of time the display’s backlight remains on.
To select the time:
1. Press <MENU> and menu items show on the display with a blinking < next to the
selected menu item.
2. Use <UP> or <DOWN> to select Display.
3. Press <ENTER> and Bright or 30Close shows on the display.
4. Use <UP> or <DOWN> to select Bright (the display’s backlight remains on) or
30Close (the display’s backlight turns off after 30 seconds of control panel
inactivity).
5. Press <ENTER>.
Reset Software
To reset the software on the Intimidator™ Spot LED 450, do the following:
1. Press <MENU> and menu items show on the display with a blinking <
selected menu item.
2. Use <UP> or <DOWN> to select ResetSystem.
3. Press <ENTER> and No or Ok shows on the display.
4. Use <UP> or <DOWN> to select No (does not reset the software settings) or Ok
(resets the software settings).
5. Press <ENTER>.
Factory Defaults
To load the factory default settings on the Intimidator™ Spot LED 450, do the following:
1. Press <MENU> and menu items show on the display with a blinking <
selected menu item.
2. Use <UP> or <DOWN> to select Load Set.
3. Press <ENTER> and No or Ok shows on the display.
4. Use <UP> or <DOWN> to select No (does not load the factory default settings) or
Ok (loads the factory default settings).
5. Press <ENTER>.
Comments to this Manuals