Chauvet COLORado 2 Zoom IP User Manual download pdf (Page 12)

Setup

-8- COLORado™ 2 Zoom IP User Manual Rev. 3

Mounting

Before mounting this product, read and follow the Safety Notes.

Orientation

Always mount this product in a safe position and make sure there is adequate room for

ventilation, configuration, and maintenance.

Rigging

The COLORado™ 2 Zoom IP consists of a double-yoke bracket and the body of the

product Chauvet recommends using the following general guidelines when mounting this

product.

• The product is not intended for permanent installation.

• When selecting an installation location, consider easy access to this product for

operation, programming adjustments, and routine maintenance.

• Make sure to mount this product away from any flammable material as indicated in

the Safety Notes

• Never mount in places where rain, high humidity, extreme temperature changes, or

restricted ventilation may affect the product.

• If hanging this product, make sure that the mounting location can support the

product’s weight. See the Technical Specifications

for the weight-bearing

requirements of this product.

• When hanging this product, always secure to a fastening device using a safety cable

(included).

Procedure

The COLORado™ 2 Zoom IP comes with a double-yoke bracket to which you can either

attach mounting clamps for hanging or simply use as a floor stand. You must supply your

own

mounting clamps. Make sure the clamps are capable of supporting the weight of

this product. Use at least one mounting point per product.

Mounting Diagram

Floor Mounting

Overhead Mounting

Clamp

Safety Cable

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 24 25

No comments

Chauvet COLORado 2 Zoom IP User Manual Page 12