Operation
-14- COLORado™ 2 Zoom IP User Manual Rev. 3
These notes clarify the way the TOUR DMX personality works.
• Channel 1 controls the intensity of the currently projected color.
• When the slider is at the highest position (100%), the intensity of the output is at
White Color Selection
• Channels 2 through 5 control the intensity ratio of each of the Red, Green, Blue, and
White LEDs.
• When these channels are at the highest position (100%), the intensity of each color is
at maximum if SET > COLR is OFF.
• You can combine channels 2 through 5 to create over one trillion colors.
• Channel 6 selects the required Color Macro.
• Channel 6 has priority over channels 2 through 5.
• Channel 1 controls the intensity of the Color Macro.
• Channel 7 controls the strobe frequency (not the intensity) of channels 2 through 6.
• Channel 7 can strobe channels 2 through 5 when not running macros, allowing the
individual faders (R, G, B, and W), as well as channel 1 (D), to control the output
intensity.
• Channel 7 can strobe channel 6 when running macros, allowing channel 6 to select
the macro and channel 1 to control the output intensity.
• Channel 8 selects the preset auto programs AT.01~10 or the custom programs
PR.01~10.
• When activating the custom Auto programs PR.01~10, you can control the Step Time
and Fade Time using channels 2 and 3, respectively.
• Channel 8 has priority over channels 2 through 7.
• Channel 9 controls the speed at which each auto program plays.
• Channel 10 selects the Dimmer mode and speed. Dimmer mode provides four
different options to simulate the dimming curve of an incandescent lighting product.
• When Dimmer is set to OFF, the changes in the RGBW and Master Dimmer faders
are linear.
• When Dimmer is set to DIM1~DIM4, DIM1 is the fastest dimmer curve and DIM4 is
• Channel 11 controls the zoom function.
• Channel 12 resets the zoom function to the starting position.
Comments to this Manuals