Operation
COLORado™ 2 Zoom IP User Manual Rev. 3 -9-
4. Operation
Description
Button Function
Exits from the current menu or function
Enables the currently displayed menu or sets the currently
selected value in to the current function
Navigates upward through the menu list and increases the
numeric value when in a function
Navigates downward through the menu list and decreases the
numeric value when in a function
You can set the COLORado™ 2 Zoom IP start address in the 001~512 DMX range. This
enables control of up to 42 products in the 12-channel TOUR personality.
Refer to the Menu Map to understand the menu options. The menu map shows the main
level and a variable number of programming levels for each option.
• To go to the desired main level, press <MENU> repeatedly until the option shows on
the display. Press <ENTER> to select. This will take you to the first programming
level for that option.
• To select an option or value within the current programming level, press <UP> or
<DOWN> until the option shows on the display. Press <ENTER> to select. In this
case, if there is another programming level, you will see that first option, or you will
see the selected value.
• Press <MENU> repeatedly to exit to the previous main level.
This setting allows you to choose a particular DMX personality.
1. Go to the PERS main level.
2. Select the desired personality (TOUR, ARC.1, AR1.D, ARC.2, AR2.D, AR2.S, or
HSV).
• See the DMX Values section for the highest starting address you can select for
each personality.
• Make sure that the starting addresses on the various products do not overlap
due to the new personality setting.
Comments to this Manuals