Operation
COLORado™ 2 Zoom IP User Manual Rev. 3 -13-
This setting allows you to reset the COLORado™ 2 Zoom IP to the default values,
including the custom programs.
1. Go to the SET main level.
2. Select REST.
3. When PASS shows, press <ENTER>.
4. Enter the master access password as described in Control Panel Lock
.
5. Wait for the reset process to finish.
This setting allows you to select and edit the temperature of the white colors used in
channel 6 (Macros) when in the TOUR mode. You can also define the maximum RGB
values when RGB to White (RGB.W) is active.
1. Go to the CAL main level.
2. Enter the master access password as described in Control Panel Lock
.
3. When CAL shows, press <UP>.
4. Go to WT.
5. Select a white color (WH.01~11).
6. Select a value for each color (R.000~255), (G.000~255), (B.000~255), and
(W.000~255).
7. Repeat for the other white colors.
This setting allows you to select the white color shown by the COLORado™ 2 Zoom IP
when the color setting is RGB.W
and the DMX controller’s Red, Green, and Blue faders
are set to “255.”
1. Go to the CAL main level.
2. Enter the master access password as described in Control Panel Lock
.
3. When CAL shows, press <UP>.
4. Go to RGBW.
5. Select RGB.W level.
6. Select a value for each color (
), (
), and (
).
When selecting CAL > RGBW > RGB.W, you will only be able to define the values
of RED, GREEN, and BLUE.
The values of RED, GREEN, and BLUE configured from CAL > RGBW > RGB.W will
define the color temperature shown when the RGB faders are set to “255” if SET >
COLR > RGBW is active.
Comments to this Manuals