Chauvet INTIMIDATOR 200 User Manual download pdf (Page 16)

Page 16 of 18 Intimidator™ Barrel LED 300 User Manual (Rev. 5)

5. TECHNICAL INFORMATION

Product

Maintenance

Dust build-

up reduces light output performance and can cause overheating. This can

lead to reduction of the light source’s life and mechanical wear. To maintain optimum

performance and minimize wear, you should clean your lighting products at least twice a

month. However, be aware that usage and environmental conditions could be

contributing factors to increase the cleaning frequency.

To clean the product, follow the instructions below:

• Unplug the product from power.

• Wait until the product is cold.

• Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on

the external surface/vents and reachable internal components.

• Clean all external optics and glass/transparent surfaces with a mild soap solution,

ammonia-free glass cleaner, or isopropyl alcohol.

• Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.

• Softly drag any dirt or grime to the outside edges of the external optics or

glass/transparent surface.

• Gently polish the external optics and glass/transparent surfaces until they are free of

haze and lint.

• When cleaning units with one or more movable mirrors, you should keep the contact

with the mirror’s surface to a minimum to avoid scratching or damaging it.

Always dry the external optics and glass/transparent

surfaces carefully after

cleaning them.

1 2 ... 11 12 13 14 15 16 17 18

No comments

Chauvet INTIMIDATOR 200 User Manual Page 16