Chauvet Q-Wash 436Z-LED User Manual Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
Operation
Q-Wash™ 436Z-LED User Manual Rev. 2 -11-
Edit Custom
Programs
This setting allows the programming of up to 49 steps in the CUSTOM running mode.
1. Go to STAND ALONE > EDIT.
2. Select STEP.
3. Set the program step (01~49).
a. Select PAN or TILT.
i. Set the position value (000~255).
ii. Repeat for the other position
b. Select DIMMER.
i. Set the intensity value (000~255).
c. Select RED, GREEN, BLUE, or WHITE.
i. Select the color value (000~255).
ii. Repeat for the other colors.
d. Select STROBE.
i. Set the frequency (00~10).
e. Select ZOOM.
i. Set the angle (000~255).
f. Select TIME.
i. Select the step duration (000~255).
g. Repeat for the other steps
4. Select USE.
a. Select
YES
to save the program or
NO
to discard.
Master/Slave
The Master/Slave mode allows a group of Q-Wash™ 436Z-LEDs (the slave products) to
simultaneously duplicate the output of another Q-Wash™ 436Z-LED
(the master
product) without a DMX controller.
1. Set each of the slave products as follows.
a. Go to STAND ALONE > RUN.
b. Select SLAVE.
2. Set the master products as follows.
a. Set the running mode to DMX as explained in DMX Control
.
b. Select an auto or custom program as explained in Auto/Custom Programs, or
a static mix of colors and movement as explained in Static Control.
The master product is the one that runs a program whether in Auto, Custom or
Static control mode.
Do not connect a DMX controller to the products configured for Master/Slave
operation. The controller may interfere with signals from the master product.
The master product should be the first product in the daisy chain.
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 35 36

Comments to this Manuals

No comments