Chauvet Q-Wash 436Z-LED User Manual download pdf (Page 18)

Operation

-14- Q-Wash™ 436Z-LED User Manual Rev. 2

Control Panel Lock

The Q-Wash™ 436Z gives you 3 different security levels, which lock out unauthorized

personnel from making changes to the product.

To secure the SETTINGS level only:

1. Go to SERVICE > ACCESS > SETTINGS LOCK.

a. Select ON to require the password to access the level or OFF to allow open

access.

To secure the SERVICE level only:

2. Go to SERVICE > ACCESS > SERVICE LOCK.

a. Select ON to require the password to access the level or OFF to allow open

access.

To secure all levels of the control panel:

3. Go to SETTINGS > DISPLAY LOCK.

a. Select ON to require the password to the control panel or OFF

to allow open

access.

When the control panel lock is active, the product will prompt you to enter the

password a

fter 30 seconds of control panel inactivity or after turning on the

product.

Password

After being prompted to enter the password:

Press

Limit Pan/Tilt Range

1. Select SETTINGS > RANGE.

2. To set the start and end points of the pan and tilt ranges:

a. Select P.START and set the pan starting point between 000~255.

b. Select P.END and set the pan ending point between 000~255.

c. Select T.START and set the tilt starting point between 000~255.

d. Select T.END and set the tilt ending point between 000~255.

3. Select USE to activate the changes.

Offset Calibration

This option allows you to calibrate the starting points of the Pan, Tilt, and Zoom motors.

1. Select SERVICE > CALIB.M.

a. Select PAN.

i. Set the position value (000~255).

b. Select TILT.

i. Set the position value (000~255).

c. Select ZOOM.

i. Set the position value (

000

255

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Comments to this Manuals

No comments

Chauvet Q-Wash 436Z-LED User Manual Page 18

Comments to this Manuals

Related products and manuals for Floodlights Chauvet Q-Wash 436Z-LED